Ideas, Anyone?

We are taking a little break during these summer months when everyone is so busy vacationing, and when we get back together in a few weeks we would like to plan out our crafts through Christmas, if possible. If you follow our blog at all and have any suggestions or ideas for projects, let us know! We can't guarantee that we will do them all, but we would love some help deciding. See you soon!

Making a Princess

This is a VERY long post, as we made tutus and all the accessories necessary for a princess. We'll start with the tutus, then move on to crowns and wands!

Toddler Tutus

The amount of Tulle needed will depend on the size of your baby/toddler and how long and/or full you want the tutu to be. You can also buy your tulle in just one color, or as many colors as you would like. To see some examples, click HERE.

• 2 year old: 6 yards for a full, floor-length tutu, 3 yards for a full knee-length tutu
• 1 year old: 3 yards for a full or knee-length tutu, 1 1/2 yards for a very short, traditional tutu.
• Elastic for waist (measure her waist for exact measurement)

Optional Tutu accessories

• Ribbon for tying into Tutu (you can get organdy ribbon in the bridal isle of craft stores for 99 cents a spool)
• Flowers from the dollar store (we will be making accessory flower clips for the tutus, but these can also be used to be stitched straight onto the tutu

Making the Tutus:

• 
• Cut your tulle into 4" wide strips, length depending on how long you want your tutu to be **Remember, we will be knotting the tulle in half over the waist elastic, so cut your tulle twice as long as you want your tutu to be**
  
• Cut your waist elastic to the desired length
• Tie elastic to two chairs, then separate the chairs so the elastic is stretched tight.
• Fold one strip of tulle in half. Hold doubled strip under elastic, then pull free ends over the elastic and down through the loop formed by the folded end. (sorry, that's hard to explain, but the pictures will give you a better idea...).
• continue with all tulle strips until finished
• To close, you can knot or sew your elastic ends together. I wanted mine to be adjustable, so I tied a bell to one end of elastic and made a loop out of the other, that way I can tighten or loosen it depending on how the loop is tied.
• Embellish with bells, flowers, ribbons, beads, etc.

Extra tips:

• If you want a fluffier tutu that doesn't tangle as easily (tulle is not very stiff and the strips can tangle) tie 3 or 4 strips together in each knot. This will keep the fluffiness but keep them straightened out better.
  
• Tulle vs. Netting: If you can afford it, netting might be better than tulle just because the tulle is so lightweight, it takes more to make it puffy and it can tangle, but Tulle is not as itchy as netting.
• I have also seen tutus made of pure ribbon (wired ribbon). Again, if you can afford it, those are beautiful as well.

Wands & Crowns

Here are the things you may need, depending on which style you choose:

• headband
• silk flowers
• dowel (12 inches)
  
• tulle (netting)
• satin ribbon to wrap dowel
• organdy ribbon for streamers
• curling ribbon for streamers
• rhinestones
• wire
• beads
• bells
  
• paint (if you want to paint dowel instead of wrapping)
• glue gun
• terrifically tacky tape
• glitter spray

Making the Wands:

• 
• Run two strips of Tacky Tape the length of your dowel (one on either side). This will keep the ribbon from slipping.
• Hot glue the ribbon to the side of one of the dowel ends.
• Pull the ribbon over the end and begin wrapping dowel with ribbon, continuing to end.
  
• Hot glue ribbon over end of dowel.
• Wand Embellishments: We put large beads on pipe cleaners, shaped them, and glued them to our dowels BEFORE gluing on ribbon (so ribbon will cover up pipe cleaner ends). We then tied ribbon and pieces of tulle, pearls, etc to our creation.

Making the Crowns:

• We bought soft, fabric covered headbands at Walmart (so they would be less irritating to our girls heads) (I believe the were $1.99 for 5), and because the colors matched our tulle color choices, we did not cover them with ribbon. If you want to cover yours with ribbon, we suggest putting tacky tape on your headband, and then using hot glue to wrap it the same as the wand.
• For beaded shapes on your crown, string beads onto a pipe cleaner, create the desired shape, and then hot glue the pipe cleaner to the headband.
  
• Tie strips of tulle to your headband in the same way you did for the tutu (if you did beads with pipe cleaners, this will cover up your pipe cleaners!). Add a dab of hot glue to the knot to keep it in place.
• Embellishments: You can glue on flowers, strands of pearls, or other embellishments as you wish.
  

Easy Single Stitch Beanies

(For whatever size head you're looking to make)

This pattern is not a crochet how-to post, just a pattern for those who already know the basics of crochet. Really all you need to know for this is how to do a single stitch, and how to work in rounds. The 9 rounds given here should be big enough for the average toddler's head.

Time for a math refresher! This pattern is all about multiplication by 6's. Until reaching the point of the beanie size desired, you'll be counting/multiplying by 2's- 9's (give or take beanie size) and keeping multiplying until reaching #6. Then you are done with that round.

Round 1; 6 single stitches in 1st loop (6)

Round 2; 2 stitches in each single stitch (12)

Round 3; 2 stitches in 1st, 1 stitch in next; repeat (18)
(Stitch pattern= 2,1,2,1,2,1,2,1 etc..)

Round 4; 2 stitches in 1st, single stitch in next 2, repeat (24)
(SP= 2,1,1,2,1,1,2,1,1...)

Round 5; 2 stitches in 1st, single stitch in next 3, repeat (30)
(SP= 2,1,1,1,2,1,1,1,2.....)

Round 6; 2 stitches in 1st, single stitch in next 4, repeat (36)

Round 7; 2 stitches in 1st, single stitch in next 5, repeat (42)

Round 8; 2 stitches in 1st, single stitch in next 6, repeat (48)

Round 9; 2 stitches in 1st, single stitch in next 7, repeat (54)

• When your beanie has a round "placemat" look and it's about the size of the crown of the head you are making it for. (It's the size of the crown when it looks like the small head covering Jewish men wear) Finish the Round you are on and then stop adding stitches and do only single stitches until the beanie is the length desired.
• When finished, tie off the yarn and cut it a generous distance from the knot. Then use a yarn needle to thread the remainder up through the weave of the beanie.
• The tightness of your yarn will play a huge roll in how many Rounds will be needed in your beanie. Example- tight stitches will equal more rounds.
• The goal is to gradually "grow" the beanie so there won't be bumps or lumps.
• For beanies to fit a larger sized head, continue adding a single stitch between the double stitches as you've done before. (example: Round 10; 2 stitches in 1st, single stitch in next 8, repeat (60) )

More Girlie Hair Clips

Since our girls seem to have a knack for losing their clips, we decided to extend our adventures in hair clips and try some new ideas, both for the clips themselves and their uses.

Bow Clips:

For these you will need some floral wire (or any very fine wire) and everything listed on the original girlie hairclips post.

• Cover your clip with ribbon
  
• For a traditional bow, fold your ribbon into a long rectangle, and pinch in the middle, forming little dimples on each side of your fingers.
• For a layered bow (like the red one pictured at right), fold your ribbon into a rectangle, pinch in the middle, and
  continue folding back and forth across the center until you have the desired number of layers. (for patterned ribbon you will have to twist the ribbon at the center each time you fold to keep the pattern face-up)
• Wrap pinched center with wire 2 or 3 times to hold shape
• Cover wire with a short strip of ribbon hotglued at the back of the bow
• Glue bow to clip

Other Tips and Ideas:

I made the large flower clip pictured at right entirely out of embellishments bought from the dollar store. Because it is spring, they had TONS of beautiful flowers for $1 a stem and about 8 flowers per stem. The jewel center was part of a cell-phone decorating kit I found (15 jewels per kit, also $1) and hot glued to my center. Beauty CAN be cheap!

On cold days, embellish a beanie with a big flower clip like the one pictured here. It can turn even the most boring beanie into a fashion statement! (These beanies are also very easy to make if you use the Knifty Knitter- you can easily make one for a little girl in about an hour)

For play-time, clip them into the waist of a dress-up tu-tu (tutorial on making the tu-tus coming soon...) as interchangeable accessories!

The possibilities are endless..... :)

Look, No hands!

Oh-so-fancy Baby Slings

What you will need:

• Fabric: You will need a total of 3-4 yards of fabric- Either 3-4 yards of one fabric, or 1.5-2 yards each of two coordinating fabrics.
  Sizing: Kelli is an XXS and her sling is 21" x 52". This will take about 1.5 yards of each fabric. You can adjust the amount of fabric you will need depending on your bust, shoulder width, hips, and height.
  Choose a heavier-weight woven fabric (one that doesn't stretch)


• Note: 3-4 yards of fabric will be enough to sew 2 complete slings -but you need to buy that much to get the length for two different prints.
  
• Pattern
• Sewing Machine
• Thread
• Cotton Piping: about 12 inches of 3/4 inch thick (this is about the thickness of a Crayola marker).

Pre-wash and dry fabric.

Making the Sling:

• Fold fabric in half and place short end of pattern along fold. Pin pattern in place and cut fabric. (repeat for 2nd fabric if you have it)
• Place cut fabric right sides together and stitch around all sides, leaving a small hole open for turning.
• Turn and press.
• Optional Step: When carrying a toddler in the sling, the fabric can hurt the back of their knees where they sit. We added piping to one side of the sling as padding for their knees. To add padding, insert piping into open hole used for turning. Center piping along one of the long sides of the fabric and pin in place. Stitch a casing around piping to hold it in place.
• Close hole (tuck in edges of fabric and stitch through them as close to the edge as possible.)
• Top stitch 1/4" from edge around all sides.
• Fold fabric in half and line up curved edges. Pin along curved edge.
• Stitch along curved edge, following top-stitch line already sewn.
• Open up sling behind curved edge. Fold curved edge to the side so it lays flat with the rest of the fabric. Pin and stitch as close to the edge as possible. (this way your seam will lie flat with your fabric when you wear the sling, and adds strength to your seam.)
• Load up your baby and go!

Extra Tips

• Before you insert your piping, make sure and tape the ends to prevent fraying. Also, if you have to cut it, tape above where you will cut, and then cut. (It's easier!)
• Our sling pattern is about a size small. If you need to make a sling for a taller/bustier mom, just make it longer (not wider). The width fits the baby, length fits you.

Pee Pee Tee Pees

I saw these at the Baby Expo the other day and just had to make some of my own just because they were so funny! Apparently the Tee-Pees serve as a little shield to keep you from getting sprayed when you change your baby boy's diaper. :)

You Will Need:

• Fabric strips (I have seen flannel and terrycloth used) at least 7" wide and length depending on how many you plan on making.
• Thread
• Sewing Machine
• Paper and scissors for making pattern
• Cup or small bowl for making pattern (circle should probably be at least 4" across)

Making the Tee Pees

• On my pattern, I have the diameter as 4 1/2" across, but another blogger found that a 6" diameter worked better, so you might want to find a cup or bowl about that diameter.
• Use the cup or small bowl to draw a circle on your paper and cut it out.
• Fold circle in half and then in half again to make an "x" marking the center of your circle
• Draw a line from the center down the middle of one of the quarters of your circle.
• Now cut out half the circle plus the little half-quarter piece, and this is your pattern.



• Use your pattern to cut out two semi-circles.
• Sew the two pieces right-sides together leaving one straight edge open for turning.



• Turn right-side out, tuck in the open seam (so raw edges are inside) and press.



• Sew the two straight edges together, and you're done!

Felt Cookies

What you will need:

• Cream or Chocolate colored felt squares (5 for $1 at JoAnne's fabric) for the cookie, pink, purple or other pastel colored squares for the frosting.
• Ecru or Chocolate colored embroidery thread
• Polyfill batting
• Puff paints in colors that coordinate with the frosting colors chosen
• Hot glue gun
• Scissors
• Quilting needle

Making the Cookies

• Find a cup or small bowl that is the desired size of the cookie you want to make and trace circles onto the Cream or Chocolate felt squares, and cut out.
• Find another cup slightly smaller than the first, and trace circles onto the pastel squares.
• Staying within the lines of circle on the pastel squares, cut out a wiggly-lined circle for the frosting.
• Use the puff-paint to put "sprinkles" on the frosting and let dry.
• With the hot glue gun, glue the outer edges of two cream colored circles together (leaving the middle and a small edge section unglued for stuffing.
• Stuff cookie with batting to desired puffiness, then glue shut.
• Once dry, glue frosting to top of cookie.
• Use a blanket stitch to stitch the outside edge of the cookie all the way around.
• "Serve" and enjoy!

Photos courtesy of Primrose Design embroidary tutorials